-40%

ROWAPHOS 250ML PACK

$ 11.56

Availability: 12 in stock
  • Condition: New
  • Item must be returned within: 30 Days
  • Refund will be given as: Money Back
  • Return shipping will be paid by: Buyer
  • Brand: Rowa
  • All returns accepted: Returns Accepted
  • MPN: ROWA-RP-25
  • Restocking Fee: No

    Description

    ROWAPHOS 250ML PACK
    Product #:
    ROWA-RP-25
    ROWA
    phos
    ?
    for reliable, effective removal of phosphate from freshwater & saltwater.
    ROWA
    phos
    is a completely new filter material for eliminating phosphate, which was developed by the Weil Industrieanlagen GmbH company in Osnabrnck, Germany. Due to its unique chemistry, it has the ability to bind large quantities of phosphate by adsorption to its surface without negatively influencing the water in the aquarium in any way.
    Why is a phosphate removal system necessary?
    Phosphate (PO4) in the aquarium is caused by the decomposition of organic substances. Especially in the confined habitat of an aquarium, several of these decomposition processes are caused from food surplus, dead plant and animal matter, and excretions (animal waste, etc.)
    It is very important to maintain PO4 concentrations at very low levels which are in harmony with the aquarium's life and habitat. Natural waters that have not been negatively affected by human use typically show very low PO4 concentrations. However, it is nearly impossible to maintain this ideal condition in an aquarium without an artificial phosphate removal system.
    An increase in PO4 concentration leads to unwanted growths of nuisance algae, and to the inhibition of lime synthesis in certain specialized marine organisms in saltwater, such as calcareous algae and stone hard corals.
    For more information on Phosphate,
    click here
    .
    What are ideal phosphate levels for freshwater and saltwater aquariums?
    To correct phosphate-induced problems, it is recommended to always
    keep the concentration of phosphate less than or equal to 0.15 - 0.3 ppm in freshwater aquarium systems
    (expressed as phosphorus P.)
    In saltwater aquarium systems, phosphate levels should always be kept below 0.015 - 0.03 ppm
    (expressed as phosphorus P.)
    How is ROWA
    phos
    used to maintain ideal phosphate levels?
    The phosphate targets mentioned above can be easily reached with ROWA
    phos
    , which effectively binds PO4 without negatively influencing the water in your tank. With ROWA
    phos
    , release of potentially toxic substances like aluminum will NOT occur. When exhausted, the product does NOT release phosphate back into the water. ROWAphos should be used regularly, especially in aquaria with very sensitive fish (
    discus,
    for example) and in reef aquariums with complex living systems.
    ROWA
    phos
    can either be used in a canister filter as a separate slow phosphate filter, or, alternately, it can function at the end of the main filter system as the final stage, after the biological and mechanical filters. The material can either be used in the filter net supplied with the pack, or sandwiched between two layers of fine filter wool (on the incoming and outgoing flow.)
    Please refer to the table below to determine how much ROWA
    phos
    should be used in your system to reduce phosphate in the water column by approximately 3ppm phosphate (measured as PO4-) and to maintain the required low levels on an ongoing basis. The amount of ROWA
    phos
    required is determined by both the level of phosphate in the water and the level of phosphate in the rocks, gravel and other substrates within the aquarium.
    On new or established aquariums where the phosphate levels are high, first measure the level in the water and assume that 2-4 times that amount may be bound up in the substrate; then adjust the ROWA
    phos
    amount accordingly.
    Amount of ROWAphos required
    to remove phosphate at 3ppm
    Aquarium Type
    Description
    Fresh Water
    Salt Water
    RP10
    100 ml packet of ROWA
    phos
    800 liters (200 US gal)
    400 liters (100 US gal)
    RP25
    250 ml packet of ROWA
    phos
    2000 liters (500 US gal)
    1000 liters (250 US gal)
    RP50
    500 ml packet of ROWA
    phos
    4000 liters (1000 US gal)
    2000 liters (500 US gal)
    RP100
    1 liter bucket/tub of ROWA
    phos
    8000 liters (2000 US gal)
    4000 liters (1000 US gal)
    The lifetime of the filter material, like the usage, depends entirely on the PO4- concentration in the aquarium. Regular control checks with a precise and reliable phosphate test will show the extraordinary effectiveness of ROWA
    phos
    . In addition, it can indicate in advance when the filter material needs to be exchanged.
    ROWA
    phos
    can work for several months in the aquarium before replacement is necessary, depending on the initial phosphate concentration and level of feeding. It is important to remember that with an established aquarium that has not used ROWA
    phos
    before, phosphate concentrations may be at exceptionally high levels of 5ppm or more, requiring several treatments over a period of time (as specified above for the tank size) to remove the phosphate from the water column and to eradicate the levels previously absorbed into the substrate and rocks.
    For more information, read our
    tips on how to use ROWAphos
    or visit the links below.
    Read how ROWAphos was used to reduce phosphate levels in Lake Pltzensee in Berlin
    ROWAPhos Phosphate Reducer Overview (PDF)
    ROWAPhos Berlin Test Results (PDF)
    Phosban Amendment (PDF)
    Why ROWAphos (PDF)
    Our Policies
    Payment Information
    IF YOU ARE BIDDING MORE THAN ONE ITEM - PLEASE WAIT AND PAY AFTER ALL AUCTIONS HAVE FINISHED. We will be happy to COMBINE SHIPPING on multiple purchases shipped in the same box. Combined Auctions / Store Purchases may not span more than 10 days. Please wait and send payment for all items together. Once you have paid for a purchase we can no longer add additional items to the box.
    Domestic and International Buyers
    We accept PAYPAL via eBay Checkout. Non-Paying Bidder will be reported after 10-15 days. If you need more time, please stay in touch or let us know you want to cancel and we will send you a cancel auction request.
    Shipping Info
    We ship UPS orders within 24 hours of cleared payment (Monday - Friday). USPS orders ship within 48 hours of cleared payment. To view shipping cost click on the Shipping & Payments tab and enter the quantity you are interested in. We ship out of our warehouse in Indianapolis, Indiana. All items listed on auction are physically in stock. We do have rare cases where inventory can be misplaced/lost in the warehouse, in these rare cases, we will contact you ASAP and offer your choice of a refund, alternative product, and/or ETA if you wanted to wait for the item.
    International Buyers are responsible for any taxes, duties, customs fees or additional charges incurred during shipping
    We ship USPS and UPS. We cannot ship gift or sample marked international packages or list a reduced value on the customs invoice.
    Please note electrical requirements for your countries electric grid. All products we sell, unless noted otherwise are 110v 60hz with a USA plug.
    Contact Us
    Store hours are 9:30 am - 6 pm Eastern time Monday through Friday. Feel free to call message us with product questions, recommendations and/or order status updates.
    Click here to visit our store